No one reads instruction manuals… tempting as it may be to rip in to the box and get vaping, we promise that reading this manual first will make your experience better!



What’s in the box? 

• 1x SERIES-S22 Battery 2600mAh 

• 1x S22 TF Tank 22mm 

• 1x 1.0Ω single vertical S-Coil – Mouth To Lung (like a cigarette) 

• 1x Micro USB charging cable 

• 1x User manual


The device is sub-ohm compatible and when you are ready to experiment you can upgrade to the DL coil at 1.0 Ω or 0.5 Ω. The lowest resistance coil the device can be used with is 0.5 Ω.


Using the device; Make sure to charge the battery before use as some batteries may not be fully charged out of the box. Follow figs.1-8 for full set up instructions. After filling your tank a new coil may flood due to priming or, a few times, as it beds in. This can cause gurgling or a bit of leakage from the airflow. To clear this hold the device (like a fishing rod) and flick (fig. 8) down sharply (in a whipping motion) a few times, this will clear any excess liquid and prevent gurgling and leaking. 


Finger-tight only: The SERIES-S22 is a precision engineered device, so you don’t need to be He-Man when tightening parts, finger-tight is enough for all threads overtightening may cause damage.


Follow the diagram below to get your S-22 Starter Kit set up and ready to use: