To use your SERIES-E, first click the button on the device 5 times and the lights around the button will proceed to flash 3 times meaning the device is unlocked. This lock means that, when it's active, your SERIES-E won't fire by accident when in a pocket or bag.


Proceed to press and hold the button as you inhale and release the button as you exhale the vapour. To switch the device off again click the button 5 times when the device is switched on.


Another feature the SERIES-E is equipped with is an adjustable power feature. To use this feature, ensure the device is switched on, then click the button 3 times; the 3 different power settings use different coloured lights as to indicate which setting you are on. We always recommend that you give each power setting a try to find which suits you best, as a higher voltage will produce more vapour which is also warmer, whereas a lower wattage will produce less vapour, which is cooler.


When your first switch on your SERIES-E, it will show a white light when pressing the power button, which indicates it is switched to the highest power of 4.8 Volts. With 3 clicks it will show a red light, to indicate the medium power setting of 4.2 Volts. Another 3 clicks and the light will flash green, which indicates the lowest power setting of 3.7 Volts.


To charge your device, unscrew the tank and beauty ring from the base of the device, and screw your 4.2v ego-style charger onto the top of the base. The USB end of the charging cable can then be plugged into USB wall chargers, laptops or even in-car USB adaptors for a charge on the go. However, if you are using an adaptor, make sure that it is 1.5amp or lower, and that a higher amp such as those found on fast-charge mobile phone chargers may damage the battery.




Unfortunately, we have had to discontinue the SERIES-E starter kits due to the new TPD regulations. If you're looking for a new starter kit or a replacement for your SERIES-E, then please check out our new range of vape pens.